Wisconsin Legislature: SPS 318.1007(2)

(om) “Type B material lift” means a powered hoisting and lowering mechanism used for carrying material and on which only the operator or the person necessary for unloading and loading the material is permitted to ride.

(p) “Vertical platform lift” means a powered hoisting and lowering mechanism designed to transport mobility-impaired persons on a guided platform that travels vertically.

(11) “Department” means the department of safety and professional services.

(12) “Dwelling unit” has the meaning given in s. 101.61 (1), Stats.

(12e) “Electrical code” means ch. SPS 316, which is the Wisconsin Electrical Code.

(12m) “First-aid treatment” has the meaning given to “first aid” in 29 CFR 1904.7 (b) (5) (ii), regardless of who is providing the treatment.

(12s) “Hoistway” means a shaft or opening through a building or structure for the travel of elevators, dumbwaiters, or material lifts, extending from the pit floor to a ceiling above.

(13) “Licensed elevator inspector” means an individual who holds a valid credential issued by the department under ch. SPS 305 as an elevator inspector.

(14) “Maintenance” means a process of routine examination, lubrication, cleaning, and adjustment of parts, components, or subsystems for the purpose of ensuring performance in accordance with the applicable requirements of this chapter.

(15) “Repair” means the reconditioning or renewal of parts, components, or subsystems necessary to keep equipment in compliance with the applicable requirements of this chapter.

(16) “Replacement” means the substitution of a device, component, or subsystem, in its entirety, with a unit that is basically the same as the original for the purpose of ensuring performance in accordance with the applicable requirements of this chapter.

History: CR 14-020: cr. Register August 2014 No. 704, eff. 9-1-14; CR 19-118: cr. (4m), am. (6), (7), renum. (10) (a) to (10) (ar), cr. (10) (ag), am. (10) (g), (i), (L), r. (10) (n), cr. (10) (om), (12e), (12m), (12s) Register May 2020 No. 773, eff. 6-1-20.

SPS 318.1005 Adoption of standards by reference.

(1) Primary standards. The following standards are hereby incorporated by reference into this chapter, subject to the modifications specified in this chapter:

(a) Safety Code for Elevators and Escalators, ASME A17.1–2016/CSA B44–16.

(b) Safety Standard for Platform Lifts and Stairway Chairlifts, ASME A18.1–2017.

(2) Secondary references. Any codes or standards referenced in the standards adopted in sub. (1) shall apply to the prescribed extent of each such reference, except as modified by this chapter.

(3) Alternate standards. Any alternate standard that is equivalent to or more stringent than a standard incorporated by reference or otherwise referenced under this chapter may be used in lieu of the incorporated or referenced standard if the alternate standard is accepted in writing by the department.

History: CR 14-020: cr. Register August 2014 No. 704, eff. 9-1-14; CR 19-118: am. (1) (intro), (a), (b), cr. (c) Register May 2020 No. 773, eff. 6-1-20.

Subchapter III — Administration and Enforcement

SPS 318.1006 Fees. Fees for plan review, permit application, inspection, permit to operate, and other services performed by the department pertaining to elevators, escalators, and lift devices shall be as determined in ch. SPS 302.

History: CR 03-047: cr. Register March 2004 No. 579, eff. 4-1-04; CR 07-089: am. Register June 2008 No. 630, eff. 1-1-09; correction made under s. 13.92 (4) (b) 7., Stats., Register December 2011 No. 672; CR 14-020: r. and recr. Register August 2014 No. 704, eff. 9-1-14.

SPS 318.1007 Plan review and approval.

(1) Approvals.

(a)

1. Before commencing the construction or installation of a conveyance, an approval shall be obtained from the department or agent municipality within whose boundaries the conveyance is to be located.

2. Before commencing an alteration of an existing conveyance as delineated in Tables SPS 318.1007-1 to 318.1007-4, an approval shall be obtained from the department or agent municipality within whose boundaries the conveyance is located.

(b) Pursuant to s. 101.983 (1) (a), Stats., the approval issued by the department or agent municipality shall be considered a permit.

(2) New installations.

(a) Number of plans.

1. When seeking an approval from the department, at least 3 copies of plans and one set of specifications shall be submitted for review for a new conveyance installation, except as provided in subd. 2.

2. In lieu of 3 copies of an installation plan, a plan in an electronic format acceptable to the department may be submitted.

Note: An acceptable electronic format does not include a facsimile.

(b) Level of detail. An installation plan submitted for review shall be of sufficient clarity and detail to show how the proposed design will conform to this chapter.

1. ‘Plan submittals.’ A plan submittal to the department for installation approval shall be accompanied by all of the following:

a. At least 3 copies of the completed application, on an approved form.

Note: Forms required under this chapter are available on the department’s website at https://dsps.wi.gov, or by request from the Department of Safety and Professional Services, P. O. Box 7302, Madison, Wisconsin 53708, or call (608) 266-2112.

b. A plan review fee.

c. An acceptance-inspection fee.

d. The initial permit-to-operate fee.

e. Sufficient information, calculations, or data to substantiate compliance with this chapter.

2. ‘Elevators or dumbwaiters.’ For an elevator or dumbwaiter, submitted materials shall include the information in the layout-drawings section in the applicable Part of ASME A17.1, and at least all of the following:

a. A plan of the car and hoistway showing all clearances, including all inside car or platform dimensions, as specified in this chapter and the building code.

b. A plan of the machine room, control room, or control space showing clearances around the machine, controller, and disconnecting means, as specified in this chapter, the building code, and the electrical code, where applicable.

c. A cross-section through the hoistway, pit, and car, showing all applicable dimensions.

d. The size and weight per foot of guiderails and details of their support, including reinforcements where required.

e. Landings indicating types of hoistway doors or gates.

3. ‘Escalators or moving walks.’ For an escalator or moving walk, plans submitted for review shall include all of the following:

a. A plan view showing step, pallet, or belt-treadway width and machine-space clearances.

b. An elevation view showing all applicable dimensions.

Note: Under this subdivision, if the scope of work for an escalator includes a replacement of the majority of internal parts, the work is considered to be a new installation even if a majority of the truss is retained.

4. ‘Vertical platform lifts.’ For a vertical platform lift, plans submitted for review shall include all of the following:

a. A plan of the platform enclosure and runway including all inside platform dimensions and clearances specified in this chapter and the building code where applicable.

b. A section through the runway, pit, and platform showing all dimensions and clearances.

c. Landings indicating types of runway doors or gates. Where manual doors or gates are provided, plans showing the clearances at manual doors or gates meeting the building code.

5. ‘Inclined platform lifts or stairway chair lifts.’ For an inclined platform lift or stairway chair lift, plans submitted for review shall include the following:

a. A plan of the lift shown in its unfolded operational position at each landing and on the stairway with egress past the lift dimensioned.

b. A section through the stairway or runway showing clearances to steps and overhead with the lift in its unfolded, usable position.

c. A calculation of egress width past the lift meeting the building code, prepared by a licensed architect or engineer, or evidence such calculation has been approved by the building code authority.

(3) Scope of alterations, repairs, and replacements.

(a) For proposed alterations, repairs, or replacements listed in Table SPS 318.1007-1 Items 1. to 4. and Tables SPS 318.1007-2, 318.1007-3, and 318.1007-4, all of the following shall be submitted with the request for approval:

1. At least 3 copies of the completed application, on an approved form, if the submittal is to the department.

2. At least 3 copies of bound equipment layout plans and specifications that conform to the applicable sections in ASME A17.1 or ASME A18.1.

3. A plan review fee.

4. An acceptance-inspection fee.

Note: See chapter SPS 302 for the amount of the fee remitted to the department when a conveyance plan is filed.

5. Sufficient data and information to determine if the proposed alteration complies with the requirements of this chapter.

(b) For proposed alterations listed in Table SPS 318.1007-1 Items 5. to 33., all of the following shall be submitted with the request for approval:

1. At least 3 copies of the completed application, on an approved form, if the submittal is to the department.

2. A plan review fee.

3. An acceptance-inspection fee.

4. Sufficient data and information to determine if the proposed alteration complies with this chapter.

- See PDF for table

Table SPS 318.1007-2
Escalators and Moving Walks

- See PDF for table

- See PDF for table

Table SPS 318.1007-3
Dumbwaiters and Type B Material Lifts

- See PDF for table

Table SPS 318.1007-4
Platform Lifts

- See PDF for table

Note: See chapter SPS 302 for fee requirements.

History: CR: 14-020: cr. Register August 2014 No. 704, eff. 9-1-14; correction in (2) (a) (title), (b) (title), (c) (title) made under s. 13.92 (4) (b) 2., Stats., Register August 2014 No. 704; CR 19-118: am. (2) (c) 1. a., (3) (title), (a) (intro.), 1., Table SPS 318.1007-1, Table SPS 318.1007-2, Table SPS 318.1007-3, Table SPS 318.1007-4 Register May 2020 No. 773, eff. 6-1-20.

SPS 318.1008 Plan review actions.

(1) Processing. The department shall review and make a determination on a request for plan approval within 15 business days, except as provided in sub. (2) (d).

(2) Determinations.

(a) Conditional approval.